We can fix most any Survey grade or Machine Control cable from all of the major manufacturers such as Trimble, Topcon, Leica, Pacific Crest and several others as well. It is generally most advisable to cut off the existing connector and install a new one. Below are pictures and costs to replace connectors that we see most of the time.
Send your cables with a business card or your Contact information to our address below.
Western States Cabling, Inc
656 Confluence Avenue
Murray, UT 84123
We will evaluate your cable and let you know our recommendations for repair. Sometimes there are more problems than observable damage.
Below are pictures and prices of the majority of connectors we have found needing to be replaced. There are other many other connectors not shown but are similarly priced.
$69.00 - Cut off defective 5 pin or 7 pin Lemo connector and install new straight 5 or 7 pin Lemo connector.
$89.00 - Cut off defective Lemo connector and install straight 5 or 7 pin small #0 shell Lemo connector with the pull wire as shown below.
$95.00 - Replace defective Lemo connector and install new 90 degree 5 or 7 pin small #0 shell Lemo connector with the pull wire as shown below.
$49.00 - Cut off any defective TNC, BNC, or N Coaxial connectors as shown below and install replacement on RG-58 Coax cable.
|Straight BNC Male
|90 Deg, TNC Male
|Straight TNC Male
|90 Deg, "N" Male
|Straight "N" Male